Specifications
| MODEL | AWP-II | AWP-III |
| Flow procedure | PF+AC+RO+DI | PF+AC+RO+DI |
| Application | Buffer disposing; Physical and chemical analysis | |
| Fine chemistry industry; GC/HPLC | ||
| Inlet water for Ultra-pure water machine | ||
| Aseptic drinking water | ||
| Feed water requirement | Tap water: TDS<200ppm,5-45°C, 1.0-4.0Kgf/cm2 | |
| (if inlet TDS>200ppm, extra pretreatment is recommended) | ||
| Purification system | Pretreatment unit | Special spun fiber filter×1 + Special active carbon block filter×1 + Special active carbon block filter×1 |
| RO unit | 100GPD RO membrane×1 | 100GPD RO membrane×2 |
| Subsequent unit | Mixed bed resin cartridge×2 | Mixed bed resin cartridge×3 |
| Pure water quality | Desalination rate | Nearly 100% |
| TDS | ROÂ water:5-10Â ppm | |
| Resistivity | 15-18.2MΩ.cm | |
| Conductivity | 0.067-0.055μs/cm | |
| Output (25°C) | 15 liters/hour | 30 liters/hour |
| Flow rate | 2 Liters/min (with pressure tank) | |
| Pure water outlet | RO water, deionized water | |
| Control system | Automatic electronic pressure sensor, RO membrane auto flushing, automatic stop without water, automatic stop when water tank full, automatic cutting off if pump stopping, Guaranteeing 24 hours’ work. | |
| Water quality test | TDS test pen +on-line resistivity monitor | |
| Power supply | AC110-220V,50/60Hz, 48W plus model:72W | |
| Package size | L×W×H:41*22*42cm/12-14kg | |
| Standard configuration | Main body (including: 1 set cartridge) +Â 4.0 gallon water tank + TDS pen accessory box |
